 |
 |
 |
 |
 Download Brochure
 (2.3MB)
|
| Typical
Physical Properties |
| TEST |
STANDARD METHOD |
UNIT OF MEASURE |
RESULT |
| IZOD
impact (23°C/73°F) |
ASTM D-256 |
ft-lb/in |
2.4 |
| Tensile
strength |
ASTM D-638 |
Psi |
>6000 |
| Modulus
of elasticity |
ASTM D-638 |
Psi |
>365,000 |
| Deflection temperature
under load @ 264 Psi |
ASTM D-648 |
°F
|
170 |
| Coefficient of linear
expansion |
ASTM E-831 |
105 in/in/°F
|
2.92 |
| Chemical resistance |
ASTM D-543 |
|
Excellent |
| Cell classification |
ASTM D-1784 |
Class # |
1334434 |
| Compound class |
ASTM D-3679 |
Class # |
2 |
| Siding/Extrudate
Typical Physical Properties |
| TEST |
STANDARD METHOD |
UNIT OF MEASURE |
RESULT |
Impact
resistance (23°C/73°F)
|
ASTM
D-4226 |
in-lb |
150 |
| Impact
resistance (0°C/32°F) |
ASTM
D-4226 |
in-lb |
100 |
| Low temperature flexibility @ 0° C |
CAN/CGSB
41 - 24-95 |
% passed |
>90 |
| Low
temperature flexibility @ -10° C |
CAN/CGSB
41
- 24-95 |
% passed |
>90 |
| Shrinkage/reversion
|
ASTM
D-3679-95 |
% |
<2.0 |
| Surface distortion
(oil can) |
ASTM
D-3679-95 |
°F |
>130 |
| Nominal
thickness |
CAN/CGSB41
- 24-95 |
mm |
1.35 |
| Wall
thickness |
ASTM D-3679-95 |
inch |
0.054 |
| Fire
Characteristics |
| TEST |
STANDARD METHOD |
RESULT |
Flame
spread index
Fuel contribution
Smoke developed index
|
CAN/ULC-S102.2 |
2.4
0
234
|
| Self-ignition
temperature, °F |
ASTM
D-1929, UBC 52-3 |
810 |
Smoke
density rating (%)
Maximum smoke density (%)
Visibility of exit sign |
ASTM
D-2843, UBC 52-2 |
42.1
56.0
Good |
Total
burn time, seconds
Extent of burning, mm
Fire resistance rating |
ASTM
D-635
ASTM D-636
ASTM E-119 |
<5
<5
1 hour |
| Physical Requirements |
| CHARACTERISTICS |
USA STANDARDS ASTM 3679-92 |
CND STANDARDS CAN/CGSB 41-24-95 |
Royal DuraPlank PEFORMANCE |
| Nominal thickness |
0.035" |
0.040" |
0.054 |
| Width |
±1/16" |
Not specified |
±1/16" |
| Length |
±1/4" |
Not specified |
±1/4" |
| Weight |
>15.81 Kg/square |
Not specified |
>18.0 Kg/square |
| Impact resistance @ 23ºC min. |
1.74 in-lb/mil |
2.00 in-lb/mil |
2.75 in-lb/lb |
| Impact resistance @ 0ºC min. |
Not required |
1.50 in-lb/mil |
1.95 in-lb/mil |
| Surface distortion |
40.5ºC (105ºF) |
55ºC (131ºF) |
>65ºC(>149ºF) |
| Low temperature flexibility @0ºC |
Not required |
80% passed |
80% passed |
| Warp |
1/8" per length max. |
1/8" per length max. |
1/8" per length max. |
| Heat shrinkage |
3.0% max. |
3.0% max. |
3.0% max. |
| Thermal stability |
Not specified |
Not specified |
100% |
| Coefficient of linear expansion, max. |
4.5 x 10-5 in/inºF in/inºF |
4.5 x 10-5 in/inºF in/inºF |
3.07 x 10-5 in/inºF |
| Specular gloss |
Not specified |
±15% max. |
±10% max. |
| Color consistency |
Not specified |
Not specified |
±0.2 - 0.5 |
| Fastener holes |
Not specified |
1" min. |
1 1/4" |
| Fastener hole spacing |
Not specified |
2" c.c.max. |
1 3/4" c.c. |
FIRE SAFETY INFORMATION
“When rigid vinyl siding is exposed to significant heat or flame, the vinyl will soften, sag, melt, or burn, and may thereby expose material underneath. Care must be exercised when selecting underlayment materials because many underlayment materials are made from organic materials that are combustible. You should ascertain the fire properties of underlayment materials prior to installation. All building materials should be installed in accordance with building codes, having jurisdiction, and fire regulations.”
TOP
|
|
|
|
|
